Sarcos Technology and Robotics Corporation has been collaborating with Changi Airport Group to develop a baggage loading system.
Sarcos demonstrates robots for shipyard operations to the US Navy
In September, Sarcos field-tested for the U.S. Navy during the Repair Technology Exercise (REPTX) at Naval Base Ventura County in Port Hueneme, CA.
Sarcos CEO Kiva Allgood to keynote Field Robotics Engineering Forum
Sarcos CEO Kiva Allgood is presenting an engaging keynote on day two of the 2022 Field Robotics Engineering Forum.
Sarcos demonstrates exoskeleton and dexterous robot
Sarcos demoed its Guardian XO, including the manipulation of a full sheet of plywood by using a vacuum gripper attached to the arm of the exoskeleton.
Sarcos ends Q4 with $34.1M in losses, $1M in revenue
For the full year 2021, Sarcos brought in $5.1 million in revenue, a decrease from the $8.8 million during 2020.
Sarcos acquiring RE2 Robotics for $100M
The combined company will offer an extended product portfolio to target a much broader spectrum of customers across the commercial and defense sectors.
Sarcos reports $1.1M in revenue, $37M in losses during Q3
Sarcos said one-time expenses associated with the public merger with Rotor Acquisition Corp. led to increased losses.
Sarcos Robotics, T-Mobile partnership enables real-time control over 5G
Sarcos Robotics and T-Mobile announce a collaboration to integrate T-Mobile 5G into the Sarcos Guardian XT robot.
April 2021 Issue: Inside the development of Sarcos’ Guardian XO exoskeleton
The April 2021 issue includes the following articles: Designing sit-to-stand motions for lower-limb exoskeletons Lower-limb exoskeletons are assisting patients with mobility impairments. Up to this point, most can’t support sit-to-stand motions without outside assistance. How computer vison, deep learning help exoskeletons adapt movements Similar to autonomous cars that drive themselves, autonomous exoskeletons walk themselves and…
Sarcos Robotics will become publicly listed through a SPAC transaction
Sarcos announces that it will become publicly listed through a merger transaction with Rotor Acquisition Corp.
Guardian DX upper body variant of Sarcos exoskeleton wins U.S. Navy contract
The Sarcos Guardian DX remote-controlled robotic system can be added to a variety of industrial mobility platforms already in use at U.S. shipyards, military bases, and depots.
Sarcos’ Ben Wolff, Uber ATG low on fuel, ROS on Spot
Welcome to Episode 17 of The Robot Report Podcast, which brings conversations with robotics innovators straight to you. Join us every week for discussions with leading roboticists, innovative robotics companies, and other key members of the robotics community. Listeners can subscribe to The Robot Report Podcast on Amazon Music, Apple Podcasts, SoundCloud, Spotify, Google Play, and…
Guardian XO exoskeleton maker Sarcos Robotics raises Series C funding
Sarcos Robotics, which has been bringing its Guardian XO industrial exoskeleton to market, has raised $40 million and added members to its board of directors.
Sarcos Defense wins Marine Corps contract for Alpha version of Guardian XO exoskeleton
Sarcos Defense has won a contract for the Guardian XO Alpha exoskeleton, which is designed to multiply the wearer’s strength and be safe to operate for a full shift.
MFE Rentals to resell and rent Sarcos Robotics Guardian S inspection robot
MFE Rentals, which provides inspection equipment, is an official rental and resale partner of Sarcos Robotics for its Guardian S robot, which is designed to remotely communicate from a variety of environments.
RMUS to distribute Sarcos Robotics’ Guardian S crawler robot in North America
RMUS, or Rocky Mountain Unmanned Systems, will distribute, integrate, and service Sarcos Robotics’ Guardian S robotic crawler system. The mobile robot is designed to be a rugged platform for industrial inspection, public safety, and more.
Delta Air Lines testing Sarcos Robotics Guardian XO exoskeleton
Delta is the first airline to investigate Sarcos Robotics’ superhero-style wearable technology for enhancing worker strength and safety.
Sarcos Robotics begins delivery of Guardian XO industrial exoskeletons
Sarcos Robotics, which develops industrial exoskeletons and other robotics aimed to enhance productivity and safety, today unveiled the Alpha version of its Guardian XO industrial exoskeleton. The Salt Lake City-based company said the first shipments of the Alpha units would ship to members of its exoskeleton advisory group and the U.S. military in January 2020.…
Guardian XO exoskeleton from Sarcos Robotics succeeds in USAF field demo
Sarcos Robotics announced that its Guardian XO exoskeleton successfully participated in the U.S. Air Force’s Mobility Guardian exercise.
Sarcos wins another U.S. contract for Guardian XO full-body exoskeleton
SALT LAKE CITY and BELLEVUE, Wash. — Today, Sarcos Robotics announced that it has been awarded a contract by the United States Special Operations Command (USSOCOM) to deliver a pre-production version of its Guardian XO full-body, autonomously powered robotic exoskeleton. Sarcos‘ exoskeleton is capable of operating for up to eight hours per battery charge while…
Sarcos Robotics raises $30M to scale production
Sarcos Robotics secured $30 million in Series B funding. The funding will help scale production and deployment of its Guardian S inspection and surveillance robot and prepare for the launch of its Guardian XO powered industrial exoskeleton in late 2019. The Series B funding was co-led by DIG Investment and Alex. Brown & Sons. Each of the Series A investors also participated in the Series B, including Caterpillar…
